INDUSTRIAL BLOWERS

[ Page 1 Of 2 ]

HOW TO ORDER:
When sending inquiries for fan kindly specify:

  1. Volume in CFM or M3/hr.

  2. Total/static pressure in inches water gauge or in mm.

  3. Temperature humidity conditions in fan.

  4. Direction of rotation-clockwise or anti-clockwise-of the impeller when viewing from Suction end, and discharge position. Various discharge positions are shown in the adjoining diagram.

  5. Discharge cross section rectangular or round.

LIMIT LOAD BLOWER

SHREE UDYOG manufactures a comprehensive range of air Pollution control equipment's to combat confined dust, smoke Fumes and other airborne industrial pollutants which are Serious health hazards and a major ecological threat. They Provide the industrial worker with cleaner environment plus Ventilation, hence improves overall efficiency. Area of applications include foundries, heat-treatment plants, steel plants, chemical processing, paper & pulp, cement, fertilizer, power generation, textiles, sugar and other industries.

SALIENT FEATURES:

Rugged Construction : The equipment are fabricated from heavy gauge steel sheet, welded throughout.
Impeller Types : Impeller are available in various designs to suit different applications, viz. backward & forward curved blades, radial, pedal wheel etc. Dynamically and statically balanced impellers ensure stable, vibration-free operation.
Material of Construction : Mild Steel standard. On request stainless steel, PVC, FRP, PP and MS-Rubber lined.

HIGH PRESSURE BLOWER

Applications : For combustion air in foundries & furnaces, glass cooling, conveying chips, smoke abatement, conveyance of gases/material etc.
Capacity : 200-5,000 m3/hr
Pressure : 125-1,200 m3/hr


  
  
  


AXIAL FLOW FANS

Applications : For Ventilation & Air conditioning requirements where many air volume & pressure combinations are required. Tube axial fans are particularly useful for handling moist/hot, air, smoke & fumes and providing fresh air.
Capacity : Unto 1,00,00 m3/hr
Range : 110-1700 mm Sweep

MEDIUM PRESSURE BLOWERS

Applications : For fume extraction, long Distance ventilation, filtration, pneumatic Conveying, etc.
Capacity : 200-10,000 m3/hr
Pressure : 200-500 mm Wg.

V-BELT DRIVE BLOWER

LOW PRESSURE BLOWERS

Applications : For general ventilation, Fume & vapor, smoke & dust exhaust Process drying & cooling, dusty air or Material conveying.
Capacity : 1000-50,000 m3/hr
Pressure : 10-200 mm Wg

PROJECT DIVISION:

We design, manufacture and commission following Systems:

*Ventilation Systems
*Fume Exhaust Systems
*Pneumatic Conveying Systems
*Kitchen Ventilation Systems

Principle of Operation:

These blowers consist of a dynamically balanced impeller which revolves in a stator-cum-compression chamber having very fine clearness between them. The impeller is fitted directly on a vertical, shaft and is driven by flange mounted motor. Both the suction and pressure openings are located on the outer perifery of the stator to reduce the impedance to air flow thereby developing vacuum and pressure

Features:

No lubrication is required since there is no friction and hence the air is absolutely oil free.
Practically nil maintenance cost.
Extremely compact unit and can be mounted inside equipment
Silencer (Optional) ensures low noise.

Specifications:

 Model

Displacement Vacuum Pressure

Max.m3/hr

Max. mbar

Max. mbar

Motor

HP  RPM

TB 001

40 60 70

0.5 

3000

TB101

120 90 100

3000

TB 202

200

170

180

3000

TB 301

300

200

210

3000

TB 404

350

230

240

3000

TB 505

450

290

300

7.5 

3000

TB 1010

600

340

350

10 

3000

Applications:

*Aeration in effluent treatment plants
*Agitation of chemicals, electroplating chemical etc.
*Air pollution monitoring equipment
*Pneumatic Conveying
*Industrial Vacuum Cleanness.

enquiry

Back to Products | Blowers - Page 2 | Blowers - Technical Data
If you can't find your product above then kindly fill up this form giving your specifications, to enable us to quote and give dimensional drawings and commercial terms .

Your Email
Create Your Product